Mf 805 anode.
Nov 22, 2021 8:08:01 GMT
Post by thecodfather on Nov 22, 2021 8:08:01 GMT
Hello, I’m new to using forums and also new to merry fisher boats, but not new to boats.
I’ve just bought a 2004 mf 805 with the tamd41 inboard, it is moored in the finest salt water of the North Sea. I would like to replace the anodes but I don’t know what the diameter of the prop shaft or if it needs an anode on it? Is the propeller anode sufficient? I’d rather go over kill than under kill and regret it down the line if anyone does know I would be very grateful if they would share it with me.
Just trying to save the extra cost of lifting the boat to just measure the prop shaft etc.
also, there is currently no anode on the stainless steel rudder, would it be advisable to have an anode on it?
I would be thankful for any advice
I’ve just bought a 2004 mf 805 with the tamd41 inboard, it is moored in the finest salt water of the North Sea. I would like to replace the anodes but I don’t know what the diameter of the prop shaft or if it needs an anode on it? Is the propeller anode sufficient? I’d rather go over kill than under kill and regret it down the line if anyone does know I would be very grateful if they would share it with me.
Just trying to save the extra cost of lifting the boat to just measure the prop shaft etc.
also, there is currently no anode on the stainless steel rudder, would it be advisable to have an anode on it?
I would be thankful for any advice