Water trap on yanmar on 53

[svkalon]

Help needed. We have a Jeanneau 2013 53 and the water trap between the engine and the exhaust blew the membrane(?) / broke. We are having a problem locating a replacement. It seems it is almost “glassed in” to the hull. Any help would be appreciated. I have pics but don’t know how to post in thread.

**UPDATE**  11/15 Got a hold of Jeanneau America and Gilles helped me out.  Great customer service.  I did have to make an account and then the ordering was super easy.  Unfortunately the delivery time is 2-12 weeks.     seriously we are stuck with no engine until it gets here and if it is truly 12 weeks we will have to haul out.  I am hoping the part is coming from somewhere in US but who knows.  IF anyone has a different source for Jeanneau parts please let me know.  The sooner the better.  Heading south Bahamas/Caribbean but stuck in NC (c-c-cold).  Of course this happened just as we were rounding Cape Haterras and then the wind died.  We were dead in the water drifting to the gulf stream and the USCG ended up having to tow us -11 hours with two coasties on board with 300' tow line to a 150' Coast Guard Cutter.  Thank goodness for the USCG but now at the mercy of a part (I know, welcome to boat life-lol)

[Tafika II]

I'd like to help, but I don't know what engine you have. I also don't recognize what membrane you are referring to. You can add pictures by hitting the add attachment button, but they need to be under 1MB.

[svkalon]

Brent it is the water trap Part #902742 and the exhaust fitting 3" Part #990515.  The boat is a Yacht 53 and the engine is a Yanmar 110HP 4JH -HTE but that part isn't engine specific I don't think  just the 3" exhaust fitting size and the trap is a 20L but those parts are specific to those above dimensions.