SF32 - Fuel Line

[phil765]

Can anyone help which end fittings and fuel line size/bore I need for replacement fuel line? its for primary to lift pump approx 600mm length

Primary is purflux pp98dn – hard to get info but I believe its Ø M14 x 1.5 from (aisbelgium.be/wp-content/uploads/2012/12/P-452-474-pr%C3%A9filtre-%C3%A0-gasoil-complet.pdf)


Engine is a 2GM20 - I think this is the fuel pump banjo listed here, not sure if its M8 or 8mm barb
www.bottomlinemarine.com/prod_cat/P_genuine-yanmar--1gm--3gm-fuel-banjo-joint--10426459030_7680.shtml


the current line is braided with pressed ends, ok to replace with normal diesel spec’d line and barbed end fittings?


Bonus marks for UK parts links 😉

  

[MalcolmP]

Aug 11, 2021 12:12:14 GMT phil765 said:

Can anyone help which end fittings and fuel line size/bore I need for replacement fuel line? its for primary to lift pump approx 600mm length

Primary is purflux pp98dn – hard to get info but I believe its Ø M14 x 1.5 from (aisbelgium.be/wp-content/uploads/2012/12/P-452-474-pr%C3%A9filtre-%C3%A0-gasoil-complet.pdf)


Engine is a 2GM20 - I think this is the fuel pump banjo listed here, not sure if its M8 or 8mm barb
www.bottomlinemarine.com/prod_cat/P_genuine-yanmar--1gm--3gm-fuel-banjo-joint--10426459030_7680.shtml


the current line is braided with pressed ends, ok to replace with normal diesel spec’d line and barbed end fittings?


Bonus marks for UK parts links 😉

  

Hi Phil765

Sorry you have not had a response to date on your question. I can't answer you, but just bumping this up, so hopefully someone can give you some pointers on dimensions and a UK source.