kansassailor
New Member
Posts: 1
Jeanneau Model: 440
Yacht Name: Rock Chalk
Home Port: Wichita, Kansas
Country: USA
Instagram: hobbs405
|
Post by kansassailor on Feb 18, 2019 19:14:53 GMT
We are commissioning a 440 and seeking ideas for maximizing storage in third cabin. Currently have factory installed refrigerator/freezer and water maker in cabin. Any ideas are appreciated.
|
|
|
Post by Fabrice-Erta on Feb 18, 2019 19:52:26 GMT
Hi,
I do not have any idea yet. We choosed worshop instead of third cabin. Woule be interested in picture of installation as we may still change some options...
Fabrice
|
|
|
Post by Tafika II on Feb 18, 2019 21:15:00 GMT
Washer/dryer, but I would suggest you place the watermaker in the bilge rather than take up cabin space. A workshop would be a great idea also. If you dive, a wet locker for gear + maybe a compressor.
|
|
|
Post by nyodyssey410 on May 2, 2019 10:21:38 GMT
We ordered a yet to be built 410. Similar layout, we went with the workshop and ordered the extra freezer
very interested in adding watermaker
|
|
|
Post by Bora on May 2, 2019 18:06:45 GMT
Be great to see some photos of boats with a workshop. The starboard cabin on my 469 is basically a storage room.
|
|
Kent
New Member
Posts: 1
Jeanneau Model: SO 410
Yacht Name: Zeitgeist
Home Port: Charlestown MA
Country: USA
|
Post by Kent on Jul 8, 2019 16:06:49 GMT
I have the opposite question. I have ordered a 410 from the factory with the workshop option but am converting it, for the time being anyway, to a cabin for sleeping. Has anyone had experience with this who would be willing to share?
|
|
|
Post by Bora on Jul 8, 2019 16:47:40 GMT
Are you able to share some photos of your current set up with the workshop please?
|
|
|
Post by Fabrice-Erta on Jul 8, 2019 21:40:01 GMT
All, Just few days before final delivery. My wife was lucky enough to get on board while while she was still under the « cocoon ». I will send some pictures next week when I will be there. The workshop looks fine even if it could/ should be optimized in terms of space. The dessal is on the wall closed to the engine and takes a lot of space. The good news is that maintenance should be easier Fabrice
|
|