andym
New Member
Posts: 5 
|
Post by andym on May 4, 2017 7:02:26 GMT
Hi everyone. Has anybody replaced the cutless bearings on an early P36, that is hull number before 65?
What size were they and where did you order them from?
Mine has 45mm shafts.
Thanks, Andy
|
|
andym
New Member
Posts: 5
|
Post by andym on May 4, 2017 15:48:15 GMT
Just to answer my own question in case anyone else gets stuck!
im pretty sure they are 45mm x 2 3/8 x 180mm.
The Jeaneau part number is 983049 and they are available from Cambrian Boats in Swansea at £274.80 inc delivered.
|
|
jmw
New Member
Posts: 8
|
Post by jmw on May 9, 2017 17:53:33 GMT
Hi Andy,
Sorry - I don't go on this forum too often but agree with your sizing. I bought mine over winter from ASAP supplies and think they were around £75 each inc delivery for brass ones.
A pig to fit unless you have a puller (which - thankfully - I have access to one!)
Cheers,
Joe |
|
