pio
Full Member
Posts: 39
|
Post by pio on Feb 18, 2010 20:26:39 GMT
I'm searching for experiences with preventive osmosis traetment with e.g. gelshield or similar products and how I could paint the hull at once without moving the support brackets at each layer of painting. I'own a SO32.
|
|
|
Post by SO 36i - Penelope on Feb 19, 2010 8:51:48 GMT
Our So36i has 6 layers of Gelshield before 2 layers of hard anti fouling were put on. You can paint 6 layers when the boat is standing in the bracket position 1. (use different colour for every layer so you can see what has been done and what not). Once these layers have dried you adjust the bracket position and paint the four remaining parts 6 times.
regards, Ewald
|
|