|
Post by boltnbrew on Jan 23, 2010 17:57:52 GMT
Does anyone know a source for the vertical panels (or a pattern of the panels so I can fabricate) to divide the aft cabin in the 43DS? I assume the cabin in the 43 is identical, but not certain.
|
|
|
Post by Zanshin on Jan 25, 2010 17:53:00 GMT
From the handwritten numbers I've seen on the woodwork on my 43, my guess is that you won't find any precut panels at all since they seem to be manufactured manually for each boat. It would be best to find a carpentry shop and have them measure and then make the panels if you don't want to do that work yourself. The manual has pictures of how to mount them, those could be used as rough guides for number and general size of the panels.
|
|
|
Post by boltnbrew on Jan 27, 2010 4:12:36 GMT
That would be unfortunate, but not surprising. I'll try Jeanneau on the off chance they are lying around the factory.
Is there anyone who would be willing to make a paper pattern if they were reasonably compensated for the time? Even photos of the installed panel(s) would be appreciated.
|
|
|
Post by boltnbrew on Feb 20, 2010 21:40:33 GMT
Bump for either pictures or a paper pattern??? Anyone have these panels??
|
|
|
Post by tomatillo on Apr 3, 2010 0:59:15 GMT
I have the panels in my boat in Mexico. I can have my mechanic copy them on a template, but he would have to take the aft berth matresses out, remove them and copy them onto some large paper or fabric yet to be determined. I bet he's there three or four hours.
You might want to come down to Puerto Vallarta and charter with J/World. You could have a lot more fun. Incidentally, I am selling or looking for partners. Its a good boat, lowest price on Yacht World, and we just won our class in the Banderas Bay Regatta. rabbitboss@gmail.com
|
|
|
Post by boltnbrew on Apr 9, 2010 3:58:33 GMT
Super! Reply sent!
|
|