|
Post by cheesesteak on Oct 31, 2021 15:44:49 GMT
Apologies if this has been asked/answered before, but I can't seem to find it in the threads.
We will be shifting our 895 from a wet dock to a lift dock in the near future. We have validated weight, beam, etc., but we have never trailered the boat and the Marina is asking for the bunk measurements to set up the lift blocks. Would someone who trailers kindly provide an inside measurement for their bunk setup or point me to anything published that addresses that measurment?
Thanks in advance!
|
|
idefixsc
Full Member
Posts: 34
Jeanneau Model: NC 895 Sport
Yacht Name: IDEFIX
Home Port: Georgetown, SC
Country: USA
|
Post by idefixsc on Nov 8, 2021 12:07:19 GMT
Hi
I didn’t trailer mine but he is sitting on bunks at a marine. I set the bunks 42’’ apart just pass the first streaks and before the second one. You could reduce if you wanted to be more center keel but I hab my transducers sticking out on both side of the keel.
Hope this helps
|
|