|
Post by sailingabe41ds on Dec 30, 2020 6:49:13 GMT
I have 2015 Jeanneau 41DS with Raymarine p70 Autopilot and Control Unit. You think that this would be joined with a mechanical or hydraulic Raymarine drive unit...but it is not. The Powerpack RV2(which is the hydraulic pump that is controlled by the control unit) and the ST Newave 12V RI hydraulic linear drive which is the piston that connects to move the rudder is made by a company called Lecomble and Schmitt in France. They have a pretty good website and if you need repairs now you know where to go. From what I can see LS has a distributer/repair place in Seattle and Southern Florida. I was hoping that my autopilot was all Raymarine for ease of repairing ... replacing. But it is not which makes it more complicated in case I were to break down somewhere. For example, does the programming differ with Raymarine Control Unit in this hybrid system....how long will these hydraulic systems last before I have to deal with a hydraulic fluid leaking mess? So, this is what I learned today in case you are interested and you assumed that your autopilot was 100% Raymarine and you wondered what that black looking motor with a square black metal reservoir and bunch of hoses sticking out and labeled ...L&S made in France was.
Abe
|
|
takeyvr
New Member
Posts: 2
Jeanneau Model: Sun Odyssey 41 DS
|
Post by takeyvr on Feb 9, 2024 22:41:20 GMT
Apologize for posting to an old thread.
I also own a 2015 41DS, and it has the exact same configuration of autopilot installed (Raymarine head with Lecomble and Schmitt drive unit).
I recently had the ACU-400 replaced due to a recall, and all the settings were reset, requiring me to set them up again. I'm unsure what the drive type setting should be for the Dockside Wizard. If you happen to know, could you please let me know?
Thanks!
|
|
takeyvr
New Member
Posts: 2
Jeanneau Model: Sun Odyssey 41 DS
|
Post by takeyvr on Feb 15, 2024 0:47:18 GMT
I've received feedback from Lecomble and Schmitt on this. They advise opting for "Type 2 Hydraulic Linear". I'm noting this down here, as it could be valuable information for anyone who may require it later on.
|
|