|
|
Post by vasko on Oct 8, 2018 8:10:59 GMT
Any suggestion from where I can source a new stern rubber stripe (white) will be very welcome...
My boat is Sun Liberty 34
|
|
|
|
Post by MalcolmP on Oct 8, 2018 9:10:34 GMT
|
|
|
|
Post by snwl on Oct 8, 2018 9:11:21 GMT
|
|
blistering
New Member
Posts: 3
Jeanneau Model: SO 45.2
Yacht Name: Captain Carlo
Home Port: NFA
|
Post by blistering on Oct 19, 2018 19:17:59 GMT
|
|
|
|
Post by rob57 on Oct 19, 2018 20:01:12 GMT
Any suggestion from where I can source a new stern rubber stripe (white) will be very welcome... My boat is Sun Liberty 34 Is it knackered or just grubby? I gave mine a new lease of life by wiping with acetone - brought it back to new. |
|
|
|
Post by vasko on Oct 19, 2018 20:18:44 GMT
I cut mine already .... I found the same but they sell minimum 120m per order for about £1600 , but I need only 4m.
According to the produced Jeanneau ordered some recently , now I’m trying to find contact in Jeanneau to
buy 4m metters but no big luck so far...
The actual type is : Wilks PVC 1180
|
|
|
|
Post by vasko on Oct 26, 2018 20:01:52 GMT
After some struggles I managed to source the right type of stripe from Jeanneau using yachtchandlers.co.uk as Jeanneau cannot sell directly to end client but rather only to dealers. Initially I got No-No from everyone until I managed to understand that my actual type is PVC1180 produced by Willks and Willks can sell minumum 125m and they have sold some large quantities to Jeanneau recently - after this point yachtchandlers.co.uk managed to talk with Jeanneau and get them to sell it  The only two small drawback are that the minimum quantity is 28m and payment can be done only by bank transfer As a result I can strongly suggest using : yachtchandlers.co.uk as a Jeanneau part supplier and so far I’m very happy with them! Also I have about 22m left rubber stripe and if someone need new I’m happy to sell part or all of it |
|
