|
Post by Aroha on Oct 6, 2016 2:45:26 GMT
Ive purchased a BaroPlug to add barometric pressure to my B&G Zeus Touch - but having opened up my electrical panel cannot see where I can add a new NMEA device - was hoping to see a spare NMEA slot just to plug into Any advice as to how to add this device? Thanks Alex
|
|
|
Post by rc sail on Oct 6, 2016 12:31:28 GMT
If you have Raymarine Auto Pilot the auto pilot computer may have 1 or 2 NEMA imput slots/ports. Otherwise you should also be able to expand(daisy chain) your NEMA devices and cabling with NEMA backbone and/or NEMA micro C T-connectors. I think the B&G install manuals (you can view on-line) may have some diagrams showing NEMA device imput to a B&G MFD.
|
|
|
Post by Aroha on Oct 7, 2016 0:18:07 GMT
Thanks - I'll have another look and think I understand what to do ok just need to find the bits
|
|