dan
Full Member
Posts: 31
|
Post by dan on Oct 23, 2013 5:56:03 GMT
Does any one know for sure what the skin fittings were made of that Jeanneau used in 2007. Any one had an old one analysed? I know the male and female elbows were monkey.
|
|
|
Post by windspeak on Oct 25, 2013 2:40:44 GMT
Hi Dan can not say for sure but all the sea cocks on my 02 so ds 43 were straight brass and starting to pink so replaced the lot with dzr rated ones also replaced the skin fittings with bronze just to be certain I was given to understand that all dzr fittings are stamped to signify compliance no stamp no dezincification further discussions on the forum disclosed that brass fittings are expectable for R.C.D. certification as they have a life value of over five years so really its owner be aware easiest way be sure is drop in to a chandlers check out the logo on a dzr fitting and see what you have no mark there standard brass.
|
|