|
Post by remmy7 on Apr 21, 2013 21:17:36 GMT
Hello all
I am currently trying to source a replacement gooseneck fitting (both the mast bracket and the toggle) for my 1984 Jeanneau Sunshine 36. I am not having a great deal of success and I am looking for all possible solutions. The damage (from excess wear) is quite extensive but I have even been considering repairing what's left with some of the modern epoxy based materials. Any suggestions as to possible replacements or methods of repair would be most welcome.
Regards Remmy7
|
|
|
Post by MartyB on Apr 23, 2013 5:08:18 GMT
Not sure where you are at.......
MOre than likely you have either a Z-spar or USSpar setup. Both brands are one and the same, Z-spar is the Europe portion, USSpar the North American equal. USSpar in in Florida, should be able to help you with no issues. I had a boom break on myArcadia, a 30' version of your sunshine, and with in a week they had one made up and was on my way to the NW US. About as far away as one can get in the 48 states!
Either of these companies should have available or be able to get you a updated version etc.
Marty
|
|