Garmin gWind™ Wireless 2 Transducer installation

[stuwright]

I have bought a Garmin gWind™ Wireless 2 Transducer to fit on my MF895 and have already fitted the GMI20 data screen which is connected to the NMEA2000. Being wireless I have no cable running issues but I am not sure how to mount it. The manual only gives details for a mast and I cannot find anything obvious on YouTube.
I am wondering if I could use the mast mount in the same position as the picture below? For some reason only the wired version is vertical.

Any ideas would be appreciated.


www.garmin.com/en-GB/p/541669/pn/010-01616-00



Thanks

Stu