Got my roof rack finished, intention is for paddle boards or a light inflatable. The side grab bars are metric (22mm?) and curved, so I used 1" fittings and ss pipe, and then used 1/32" rubber to pad the fittings so they fit, I could only get 4 of the Victory low profile take apart Ts anywhere in Canada, so had to use amazon hinged Ts for the front to back bars, maybe I'll replace them when Victory gets more in stock so they all match. Had the tubes bent to 45 degrees at each end by another NC795 owner at his shop, and then cut them down to the right length as I fit it in place. Pretty happy with the end result.
Last Edit: Mar 31, 2022 16:24:01 GMT by MalcolmP: images
I think its the best looking solution without drilling the roof. Better looking than Jeanneau rack system in S2. Congrats. If you can get those pieces on the market and put them together no problem. Here I would have to order them custom made and the price would be relatively high. I will try vacuum holders and two paralel bars this year. Somebody has done it and says no problem faced in all kinds of weather. If mine does not work, I will definitely duplicate yours.