|
|
Post by virtualburton on Sept 12, 2021 3:24:49 GMT
Hi guys - I'd like to add a few 115 VAC outlets and a few 12v light switches. Ideally I'd like to get the same ones that are in my 2013 SO 469.
Has anyone found a source for them or a manufacturer?
Thanks in advance,
David
|
|
|
|
Post by Chris Meyer on Sept 12, 2021 13:13:54 GMT
You likely can order directly from Jeanneau parts. Easier to match.
|
|
|
|
Post by virtualburton on Sept 13, 2021 18:55:13 GMT
Thanks for the tip Chris and you were right - you can find them at spareparts.jeanneau.usThe only issue is the ones I need to add are all black and they only sell white ones... not sure why. I found out they are made by Vimar and are Eikon style. In North American it's very hard to tell what you need... the system is module so you need some sort of box then the outlets/swithces to go in them but I couldn't figure out what I needed. Oh well, I'll use standard NA outlets. David |
|
|
|
Post by Chris Meyer on Sept 15, 2021 13:38:12 GMT
Call them. Ask for Ward Richardson. He runs the Beneteau parts center which also supplies Jeanneau parts of course.
Very helpful.
or email him at ward@beneteauusa.com
|
|
|
|
Post by virtualburton on Oct 9, 2021 5:08:19 GMT
Call them. Ask for Ward Richardson. He runs the Beneteau parts center which also supplies Jeanneau parts of course. Very helpful. or email him at ward@beneteauusa.com Thanks for this Chris - I was able to get 2 of them, arrived today. I had to create an account and for that they needed my hull ID and model details. I also picked up some gel coat and a new gas strut for my Fridge door. For anyone curious, the switches are made by Vedder but I didn't;t find anywhere except Jeanneau to buy them from. they look like this:  Thanks! David |
|
|
|
Post by Chris Meyer on Oct 9, 2021 11:43:35 GMT
Terrific!
|
|
|
|
Post by virtualburton on Nov 30, 2021 18:59:40 GMT
Call them. Ask for Ward Richardson. He runs the Beneteau parts center which also supplies Jeanneau parts of course. Very helpful. or email him at ward@beneteauusa.com @chrismeyer - Just a quick update - I tried emailing Ward and the email bounced, no such address. He must be gone from Beneteau? |
|
|
|
Post by Chris Meyer on Dec 2, 2021 14:31:21 GMT
Call them. Ask for Ward Richardson. He runs the Beneteau parts center which also supplies Jeanneau parts of course. Very helpful. or email him at ward@beneteauusa.com @chrismeyer - Just a quick update - I tried emailing Ward and the email bounced, no such address. He must be gone from Beneteau? try this: registration.spr@beneteauusa.com I could not find a phone number on the site. Ward might have left. This site handles jeanneau and beneteau |
|
