davidh
Full Member
Prestige 32 Sundance
Posts: 37
|
Post by davidh on Jun 15, 2010 9:51:31 GMT
We are suffering very low water levels in Lough Erne in Northern Ireland at present. Quite a few boats are clipping propellers. Can anyone advise on the dimensions of the hull on a 2003 Jeanneau Prestige 32? I have a Raymarine Tridata Depth sender positioned beside the two engine seacocks. Can anyone confirm the distance from this point to the lowest point of the hull. I need to reset the depth reading to account for this difference. I understand the props are positioned in two half tunnels and the two rudders are potentially lower than the props. Is the central keel lower than the props/rudders? Can anyone send photos from the lower part at the stern looking forward.
Many Thanks
David Horan
|
|
alexv
New Member
Posts: 4
|
Post by alexv on Jul 12, 2010 14:35:36 GMT
I have mailed you some pictures to your email. Hope they help.
Regards,
Alex
|
|
davidh
Full Member
Prestige 32 Sundance
Posts: 37
|
Post by davidh on Jul 19, 2010 9:52:16 GMT
Alex
Photos are very useful.
Many thanks
David
|
|