|
Post by davideso37 on Jul 6, 2012 13:44:29 GMT
We have two factory installed speakers in the cockpit of our SO37. On one side the only thing keeping water in the cockpit from filling the hull via the full depth port locker is the cone in the speaker. The original cone disintegrated under UV light exposure and the plastic cover was damaged by the feet of the crew. I would like a strong cover for the speaker preferably stainless steel and a means of ensuring the locker is kept water tight. Any good ideas? David
|
|
|
Post by davideso37 on Jul 7, 2012 6:45:44 GMT
Webcrew, Saw that and while solving the speaker face problem does not address the water into the locker if the speaker cone disintergrates. If no better ideas are forthcoming I may mould a couple of watertight recesses into the locker sides. Regards David
|
|
|
Post by j on Jul 7, 2012 10:01:32 GMT
|
|
|
Post by rene460 on Jul 7, 2012 11:49:42 GMT
Hi David, My so30i has the same issue port side where the speaker is effectively in the locker, and the same problem you are addressing. Stbd side speaker is in aft cabin, and was factory fitted with a waterproof cover so that it looks quite neat. I can not see how it is held I place but your proposal to mould water proof covers looks to be on the right track. You have me thinking about my locker side risk as well now you have pointed it out. Regards Rene460
|
|
|
Post by shiook on Jul 9, 2012 23:00:57 GMT
My 2010 36i has plastic buckets bolted behind the speakers for water intrusion protection. They look "off the shelf" from the speaker company. They are the same diameter as the speaker with the same bolt hole pattern. Photos this weekend.
|
|
|
Post by davideso37 on Jul 10, 2012 14:21:07 GMT
Shiook, That sounds perfect. Do you have a brand name? David
|
|
|
Post by shiook on Jul 13, 2012 14:27:16 GMT
Poly-Planar SBC-2 8 1/2" Universal Speaker Back Cover Enclosure$19.00 each
Details:
Provides rear protection and resonance for most round flush mount speakers. Perfect for a situation where the rear of your flush mount speakers might be exposed to open air.
Features: Priced and sold individually, not in pairs Fits speakers that require up to a 6" cutout hole and a mounting depth up to 2 5/8" Made of high impact ABS plastic Groove for speaker wire Total diameter of the enclosure: 8 1/2" 1 year manufacturer warranty IMPORTANT: This enclosure is designed to attach to the rear mounting surface, not to the speaker itself, so there is no need to worry about matching the screw hole pattern of your speakers to the enclosure.
|
|